Skip to main content

About CEEF — 48 Years Engineering Thermal Fluid Heating at Industrial Scale

Changzhou Energy Engineering Co., Ltd. — the primary drafter of China's National Standards for Thermal Oil Heaters (GB/T 17410) and Marine Exhaust Gas Thermal Oil Heaters, as well as Industry Standards for Marine Hot Oil Heaters, Molten Salt Heaters, Chemical Furnace Pressure Components, and Industrial Boilers, and the ASME-certified partner behind record-scale petrochemical, molten salt, and CSP projects.

Driven by Practice. Defined by Innovation. Dedicated to Excellence.

CEEF delivery fleet of trucks loaded with thermal oil heaters leaving the Changzhou, Jiangsu Province, China factory
  • 01 · Engineering
    Hard-Core Engineering

    ASME-S & U stamped · 100% NDT on pressure parts · CMA & CNAS authoritative testing

  • 02 · Standards
    Standard Setter

    Primary drafter of National Standards (GB/T 17410 Thermal Oil Heaters, Marine Exhaust Gas Thermal Oil Heaters) & Industry Standards (Marine Hot Oil Heaters, Molten Salt Heaters, Chemical Furnace Pressure Components, Industrial Boilers)

  • 03 · Delivery
    Proven Mega-Projects

    60 MW single-unit record · 50 MW CSP plant · 18,000+ units worldwide

Corporate Profile

Four Decades of Heavy Heater Fabrication & Thermal Engineering

Changzhou Energy Engineering Co., Ltd. (CEEF), founded in 1978 as the Changzhou Energy Equipment Factory in Changzhou, Jiangsu Province, China, is one of the world's leading designers and manufacturers of thermal oil heaters, hot oil heaters, and thermal fluid heaters. Today, the company specializes in the R&D and manufacture of thermal oil heaters (organic heat carrier furnaces), pressure vessels, molten salt heaters, and solar thermal energy storage equipment. Over 40 years of continuous R&D and manufacturing accumulation have established CEEF as one of China's most comprehensive and capable thermal oil heater manufacturers. On December 15, 2022, Changzhou Energy Equipment General Factory Co., Ltd. completed its joint-stock restructuring and was officially renamed Changzhou Energy Engineering Co., Ltd.

Energy-Saving R&D · National Standards · Provincial Center

Dedicated to the R&D of energy-saving and environmentally friendly equipment, CEEF continuously upgrades traditional manufacturing with advanced high-tech engineering—not only serializing thermal oil heaters and hot oil boilers, but also pioneering molten salt heaters and solar thermal energy storage systems. CEEF has become a core supplier to numerous national key projects in China, with equipment operating reliably in major industrial installations worldwide. Throughout the evolution of the industry, CEEF served as a primary drafter of China's National Standard for Thermal Oil Heaters (GB/T 17410) and Marine Exhaust Gas Thermal Oil Heaters (GB/T 24947), as well as the Industry Standards for Marine Hot Oil Heaters (CB/T 3954), Technical Specification for Molten Salt Heaters (HG/T 20658-2014), Technical Specification for Manufacture of Pressure Components of Chemical Industrial Furnaces (HG/T 20589), and Technical Conditions for Industrial Boilers (NB/T 47034). As early as 2001, CEEF undertook China's National Major Technical Equipment Innovation Program. In 2011, the company established the industry's sole provincial enterprise technology center at the time—the Jiangsu Ultra-Large Intelligent Thermal Fluid Heater Engineering Technology Research Center—and in 2016 was recognized as a Jiangsu Provincial Enterprise Technology Center.

1978
Year Founded
18,000+
Units Deployed
60 MW
Largest Unit (51,000,000 kcal/h)
30%
International Revenue
CEEF Changzhou Energy Engineering factory facility in Changzhou, Jiangsu Province, China
CEEF Manufacturing Facility — Changzhou, Jiangsu Province, China

Product Matrix & Intellectual Property

25 kW – 60,000 kW, Full Product Matrix & Proprietary Software

Through more than four decades of dedicated research, CEEF has developed a complete product matrix of thermal oil heaters and hot oil heaters—including the coal-fired (biomass) series, oil-fired series, dual-fuel (oil & gas) series, dual-fuel (coal & gas) series, coal-water slurry series, pulverized coal series, wood-waste-fired series, sanding-dust-fired series, and electric heating series—with thermal outputs ranging from 25 kW up to 60,000 kW (60 MW), alongside solar thermal power (CSP) thermal oil heater systems. Our flagship 'Xianfeng' (Pioneer) brand thermal oil heaters have won numerous honors, including China's National Silver Quality Award, Jiangsu Famous Brand Product, and Jiangsu Famous Trademark. CEEF also owns independent intellectual property rights to its proprietary thermal oil heater design-calculation software, holds 63 valid independent IP rights (including 6 invention patents, 55 utility model patents, and 2 software copyrights), and is recognized as a Top 100 Patent Enterprise in Changzhou.

Global & Academic Collaboration

Industry–University–Research Alliances

Through extensive international exchange and industry-university-research collaboration, CEEF maintains over 20 years of technical cooperation with world-renowned industry leaders including Bertrams (Switzerland) and Vyncke (Belgium). Domestically, CEEF has established long-term R&D partnerships with Xi'an Jiaotong University, Nanjing Tech University (formerly Nanjing University of Chemical Technology), Changzhou University, the First Design Institute of the Ministry of Chemical Industry, and the Shanghai Merchant Ship Design & Research Institute (SDARI). In recent years, CEEF has spearheaded major technological breakthroughs in ultra-large-scale process heaters, advanced low-NOx combustion technologies, high-intelligence automated control systems, and IoT-based remote operational monitoring—continuously driving the next generation of industrial heating equipment.

Uncompromising Quality Control

From proprietary thermal calculations to 100% NDT inspection and CMA/CNAS compliance, every CEEF thermal oil heater is engineered and verified to meet the most stringent global standards.

50+
Certified Welders

Elite Welding Team

Staffed by 50+ certified senior welders with 223 qualified welding procedures (WPS/PQR).

100%
NDT Coverage

100% NDT Inspection

Rigorous 100% Non-Destructive Testing (X-ray real-time imaging and ultrasonic flaw detection) on all pressure-bearing components to guarantee absolute ASME and GB code compliance.

15
Analysis Systems

Full-Process Material Traceability

In-house laboratory equipped with 15 advanced physical, mechanical, and chemical analysis systems.

100%
Compliance Rate

100% International & Domestic Testing Compliance

Every thermal oil heater and molten salt heater shipped from CEEF strictly meets authoritative CMA and CNAS testing standards.

Engineering Core

Proprietary Design & Engineering

Every CEEF thermal oil heater and hot oil heater is sized with our self-developed thermal fluid heater design-calculation engineering software — proprietary IP built on 40+ years of R&D and engineering experience. Developed and maintained in-house, it governs the thermal and fluid-dynamic design of every unit we build.

  • Thermal Oil Heater Design Software
  • Self-Owned IP
  • SolidWorks 3D Design

Full-Lifecycle Customer Service

Responsive, High-Efficiency Service Team

CEEF operates a mature market service organization with online sales engineers and technical specialists providing rapid one-on-one consulting and troubleshooting. We guarantee a 2-hour after-sales response, 8-hour solution delivery, and 48-hour on-site arrival for domestic projects — backed by standardized and customized system solutions across 80+ heater models and 60–86,000 kW heating capacities.

Within 2h
After-Sales Response
Within 8h
Solution Delivery
Within 48h
On-Site Arrival

Heavy Manufacturing & Shop Floor

Built Under Our Own Roof

From crane-lifted vertical heater bodies to wound radiant coils, the heavy fabrication behind every CEEF heater happens on our own shop floor in Changzhou.

Interior of the CEEF heavy manufacturing workshop with an overhead bridge crane, vertical cylindrical thermal oil heater bodies and rows of modular convection tube banks under fabrication Heavy Fabrication Hall

Modern Heavy-Duty Manufacturing Workshop

Large overhead cranes give CEEF the lifting and handling capacity to build heavy equipment in-house, with vertical cylindrical heaters and Modular Convection Tube Banks fabricated in batches on one shop floor.

Large helical radiant coils being rolled and assembled into the furnace bodies of CEEF ultra-large thermal oil heaters on the factory floor 28 MW · 24,000,000 kcal/h

Ultra-Large Helical Coil & Furnace Assembly

Tightly wound Helical Radiant Coils are rolled and assembled into the furnace body of a single 28 MW (24,000,000 kcal/h) class thermal oil heater.

R&D Strength, Patents & Global Technology Partnerships

Cooperative development, application research, technological transformation, and environmental treatment — backed by provincial-level research infrastructure.

Est. 2011 · Provincial Engineering Technology Center

Provincial Research Center, Proprietary Software & Academic Alliances

Our proprietary thermal oil heater engineering calculation software and smart IoT remote-monitoring control systems are developed alongside long-term R&D partners:

  • Xi'an Jiaotong University
  • Nanjing Tech University
  • Changzhou University
  • First Design Institute, Ministry of Chemical Industry
  • SDARI
63

National Patents & IP

Including 6 invention patents, 55 utility model patents, and 2 software copyrights — protecting innovations in combustion, heat transfer, safety, and intelligent control as a Top 100 Patent Enterprise in Changzhou.

International Technical Cooperation

European process-heat know-how, applied to molten salt, chemical heating and biomass combustion.

Two world-renowned European partners, over 20 years of continuous technical cooperation — each with a distinct engineering focus.

BERTRAMS AG

Switzerland

High-temperature molten salt and chemical process heating

VYNCKE

Belgium

Biomass and wood-waste combustion engineering

Authoritative Certifications & Quality Approvals

From ASME stamps to provincial and national performance honors — every CEEF heater is certified to be compliant, and recognized to be better.

Premium
Provincial quality benchmark

Provincial Premium Quality Mark

Jiangsu Boutique Certification

Jiangsu Province's premium quality mark — reserved for products that outperform national standards. For CEEF, meeting the code is the starting line, not the finish.

Beyond Tier-1
YLL-39000MA · Exceeds Tier-1 Standard

Ministry of Industry & Information Technology

National Energy Efficiency Star (MIIT)

Our YLL-39000MA coal-fired thermal oil heater was awarded China's National Energy Efficiency Star by MIIT, with thermal efficiency outperforming the national Tier-1 energy efficiency standard — delivering more heat from every ton of fuel with lower emissions.

Engineering Milestones

48 Years of Pushing Thermal Limits

From the 1978 Xianfeng-brand founding to national code drafting, a provincial R&D center, 50 MW CSP demonstration plants, and 60 MW smart heating systems.

  • Heritage
  • Standards & R&D
  • Engineering & Delivery
  1. Heritage 1978

    Founding of Changzhou Energy Equipment Factory

    Founded in Changzhou, Jiangsu Province, as the Changzhou Energy Equipment Factory — the starting point of 40+ years of continuous thermal oil heater, hot oil heater, and pressure vessel R&D and manufacturing.

    Continuous R&D & manufacturing
    40+ yrs
  2. Key R&D & Code Drafting 1986–1990

    National "Seventh Five-Year" Key Sci-Tech Program & Code Drafting

    Undertook China's National "Seventh Five-Year" Key Sci-Tech Tackle Program to develop the QX series thermal oil heaters; drafted the Jiangsu Provincial Standard for Coal-Fired Organic Heat Carrier Heaters in 1988, and co-drafted the national Safety Technical Supervision Regulation for Organic Heat Carrier Boilers.

    National Key R&D Program · Code Drafting
    7th Five-Year
  3. Commercialization & 1st National Standard 1991–1998

    National Key New Product & First GB/T 17410 National Standard Released

    The QX series thermal oil heater won China's National Silver Quality Award (1991), was selected into the National Key Sci-Tech Achievements Promotion Plan (1991–1995), and was recognized as a National Key New Product (1994) and Jiangsu Famous Brand Product (1995). In 1998, the first edition of China's National Standard Organic Heat Carrier Furnaces (GB/T 17410), lead-drafted by CEEF, was officially released.

    First National Standard · 1998
    GB/T 17410
  4. National Major Program 2001–2010

    National Major Technical Equipment Innovation & Standard Revisions

    Undertook China's National Major Technical Equipment Innovation Program; commissioned by national ministries to draft the Marine Hot Oil Heaters industry standard (2002) and revise the National Standard Organic Heat Carrier Furnaces (GB/T 17410-2008, revised in 2007 and implemented in 2008). Completed the relocation to a modern heavy manufacturing campus in 2007, doubling corporate output.

    National Major Equipment Program · Standard Revision
    GB/T 17410-2008
  5. Provincial R&D & Standards 2011–2014

    Provincial R&D Center & Molten Salt Heater Standard

    Established the industry's sole provincial enterprise technology center — the Jiangsu Ultra-Large Intelligent Thermal Fluid Heater Engineering Technology Research Center (2011); designated a Jiangsu Quality Supervision and Inspection Demonstration Base and benchmark boiler enterprise (2012); co-authored industry standard HG/T 20658-2014 Technical Specification for Molten Salt Heaters officially took effect (2014).

    Molten Salt Heater Standard · 2014
    HG/T 20658
  6. CSP & Ultra-Large Breakthroughs 2015–2021

    CSP Thermal Storage Systems & Ultra-Large Dual-Fuel Heaters

    Partnered with CGN in 2015 on China's first batch of national CSP demonstration projects — designing and fabricating core thermal oil/molten salt heating equipment (three 18.5 MW gas-fired heaters) for the CGN Delingha 50 MW CSP plant, and manufacturing three 12,000,000 kcal/h coal-fired thermal oil heaters for Formosa Plastics (Nan Ya). Signed the Shouhang Dunhuang 10 MW tower CSP 400×10⁴ kcal/h coal-fired salt-melting heater project in 2016; commissioned a self-developed 1250×10⁴ kcal/h pulverized-coal & natural-gas dual-fuel thermal oil heater at full load in 2017; won the bid for the UAE CSP project in 2019, breaking foreign technology monopolies.

    National CSP Demonstration · Global Breakthrough
    50 MW CSP
  7. Restructuring & Upgrade 2022–Now

    Joint-Stock Restructuring & Intelligent Heating Systems

    Completed joint-stock restructuring on December 15, 2022 and was officially renamed Changzhou Energy Engineering Co., Ltd. (CEEF), continuously spearheading R&D in ultra-large process heaters, low-NOx combustion, high-intelligence automated control, and IoT remote monitoring across a full 25 kW to 60,000 kW product range.

    Full-Range Output Ceiling · 60 MW
    60,000 kW

Partner with China's Thermal Oil & Thermal Fluid Heating Leader

Join 18,000+ deployed units and global industry leaders who trust CEEF for reliable, efficient, and standards-compliant thermal oil heater, hot oil heater, and thermal fluid heater systems.