Skip to main content
24/7 POWER · THERMINOL VP-1 · HOT/COLD TANKS

CSP Molten Salt Thermal Energy Storage

  • Heat Transfer & Storage Media: Molten Salt & Therminol VP-1 Synthetic Thermal Oil (Dual-Media)
  • Core Equipment: High & Low Temperature Storage Tanks & Oil-to-Salt Heat Exchangers
  • Subsystems: Integrated trace heating, salt-melting startup & safety interlock control
Concentrated Solar Power (CSP) molten salt thermal energy storage system with high and low temperature tanks

Overview

To achieve 24/7 continuous, dispatchable electricity generation in Concentrated Solar Power (CSP) plants, abundant daytime solar thermal energy must be efficiently stored for nighttime peak-shaving power generation. The CEEF CSP Molten Salt Thermal Energy Storage System is a proven utility-scale thermal storage solution that makes dispatchable clean solar power a reality.

System Workflow

During daytime high-irradiance hours, the solar collector field first heats Therminol VP-1 synthetic thermal oil in the primary loop; the high-temperature thermal oil then transfers its heat to molten salt via high-efficiency oil-to-salt heat exchangers, storing massive thermal energy in heavily insulated high-temperature molten salt tanks. At night or during overcast periods, the process reverses: high-temperature molten salt heats the Therminol VP-1 thermal fluid, generating high-temperature, high-pressure steam to drive the steam turbine generator continuously.

Core Technologies

  • Primary Storage & Heat Exchange Infrastructure: Large-scale high-temperature and low-temperature molten salt storage tanks paired with high-precision dual-media (thermal oil to molten salt) heat exchanger trains.
  • High-Temperature Fluid Transport Network: Heavy-duty long-shaft molten salt pumps, specialized high-temperature molten salt valves, and a fully heat-traced pipeline network.
  • Turnkey Integrated Subsystems: Delivered as a complete engineered package covering the salt-melting subsystem, startup thermal oil heater subsystem, electric trace-heating and insulation subsystem, and safety relief subsystem.
  • Automated Energy Dispatch: Centrally coordinated by an advanced DCS/PLC control system for seamless transitions between daytime heat collection/storage and nighttime heat release/power generation.

Direct Factory Engineering

Get a Custom Quote & Datasheet

Tell our thermal engineers your operating temperature, heat load, and available fuel. We will size the right CSP Molten Salt Thermal Energy Storage configuration and reply within 24 hours.

  • ASME S & U Stamp, ISO 9001 & CCS Marine certified fabrication
  • Sized with proprietary thermal calculation software (40+ years IP)
  • Direct from the Changzhou manufacturer — no trading middlemen

Prefer email? Write to contact@ceef.com

← Back to All Products

Send Your Project Requirements

Inquiring about
CSP Molten Salt Thermal Energy Storage

By submitting, you agree to our Privacy Policy. We never share your data with third parties.